FoMaKo K820N - Port Settings

FoMaKo
Focus Your Streaming www.fomako.net
13
1) Lan Settings
The camera enabl
ed DHCP by default, camera’s
ip address will shown on the screen. When you
finished to add the camera to your network,
you’d better change the IP from “Dynamic IP
Address” to “Fixed IP Address”, then camera will
keep currently IP, or when camera reboot or
router reboot, router will assign a new IP address
for the camera.
The MAC address cannot be modified.
2) Port Settings
A. HTTP Port
IP address identifies the network device, the
device can run multiple web applications, each
network program using network port to transmit
data, so data transmission to be carried out
between the port and port. Port setting is to set
up web server program using which port to
transmit. When port mapping, need to be
consistent with the port number
(default port: 80).
B. RTSP Port
The camera support RTSP protocol, use the VLC
tools broadcast, default port: 554.
C. TCP Port
Support TCP connection then control camera,
default port: 5678.
D. UDP Port
Support UDP protocol, default port: 1259.
E. Sony Visca
Support Sony Visca, default value: 52381.
3) RTMP(S) Settings
Setting the MRL of RTMP, select enable or disable
video and audio. You can select control code
stream of “On”, “Off”, “Video”, “Audio” between
in the two streams.
4) SRT Settings
Turn On/Off SRT, Setting the SRT Port, SRT Encry
and SRT Password.
5) RTSP Settings
Turn On/Off RTSP Auth.
6) ONVIF Settings
Turn On/Off ONVIF and ONVIF Auth.
7) Multicast Settings
Turn On/Off multicast. Setting the multicast
address (default value is 224.1.2.3) and port
(default value is 6688, then 6688 is the multicast
port of the first stream; 6690 is the multicast port
of the second stream).
8) NTP Settings
Turn On/Off NTP time sync, main time show and
sub time show. Setting NTP server address, time
interval, main stream position and sub stream
position.
SRT Settings
SRT On Off
SRT Port
4578
SRT Password
1234564913131
SRT Encryption
None
RTSP Settings
RTSP Auth
On Off
ONVIF Settings
ONVIF On Off
ONVIF Auth
On Off
Multicast Settings
Multicast On Off
Address
224.1.2.3
Port
6688
NTP Settings
Server address
cn.ntp.org.cn
NTP time sync On Off
Time Zone
(GMT+08:00) Beijing, China
Time interval(min)
1440
Main time show
On Off
Position
X0 Y0
Sub time show On Off
Position
X0 Y0
Submit Cancel