To Next PageTo Next Page
Need help?Do you have a question about the FoMaKo 12X and is the answer not in the manual?
General| Zoom | 12X Optical Zoom |
|---|---|
| Weather Resistance | IP66 |
| Two-Way Audio | Yes |
| Connectivity | Wi-Fi |
| Field of View | 90° |
| Storage | MicroSD |
| Motion Detection | Yes |
Details the various video output methods available for the camera, including HDMI, SDI, and LAN.
Provides a two-step process for connecting the camera and controller to the network.
Explains how to add the camera to the IP PTZ controller, including necessary port and protocol information.
Lists precautions regarding pressure, liquids, temperature, cleaning, and electrical safety standards.
Recommends stable placement, advises against powering on before installation, and warns of magnetic interference.
Introduces the camera model and details its various physical interfaces.
Explains how to connect the camera's various ports for optimal operation.
Illustrates the complete wiring diagram for connecting the camera's ports and accessories.
Provides notes and considerations for installing mounting brackets for the camera.
Details the initial steps for wall mounting the camera, including bracket and post installation.
Completes the wall mounting process by detailing the final steps to attach the camera securely.
Provides step-by-step instructions for securely mounting the camera on a ceiling.
Presents the physical dimensions of the camera for installation planning.
Shows camera dimensions and lists standard and optional accessories included with the product.
Defines the RS-232 interface, including its purpose and pinout details.
Details the pin configurations for both Mini-DIN 8-pin and DB9 RS-232 connectors.
Illustrates a basic diagram for setting up VISCA networking connections.
Explains how to use the rotary DIP switch to select the video format.
Highlights the primary features of the camera, including resolution, encoding, and auto-focus.
Details advanced features like multiple video outputs, compression standards, and network protocols.
Presents detailed technical parameters, including optical zoom, sensor, video formats, and environmental conditions.
Summarizes all camera input and output interfaces.
Covers PTZ rotation limits, control speeds, preset capabilities, and operational parameters.
Introduces the IR remote control, explaining key press conventions and basic functions.
Describes how to activate standby mode and select cameras for control using the remote.
Explains how to adjust focus using auto or manual modes with the remote control.
Details how to operate the zoom function using the remote control.
Guides on setting, calling, and clearing camera preset positions using the remote.
Covers manual pan/tilt control and returning the camera to its home position.
Explains how to navigate the On-Screen Display (OSD) menu and modify settings.
Details how to set camera addresses and adjust PTZ and preset speeds via remote.
Lists key combinations for system functions like clearing presets, factory reset, and DHCP settings.
Provides key combinations to switch between different video formats supported by the camera.
Explains menu navigation and how to change the menu language.
Visually represents the camera's menu structure, showing parameter categories and navigation paths.
Guides on connecting the camera to the network, setting IP address, and disabling DHCP.
Details how to access the camera's web interface and log in as administrator or user.
Explains how to configure video encoding for main and sub streams, including format, size, and bit rate.
Provides examples of RTSP and RTMP URLs for obtaining video streams from the camera.
Details the setup for SRT streaming, including port and encryption key settings.
Guides on configuring the camera to push RTMP streams to public servers.
Explains how to enable and configure NDI functionality for video streaming.
Details the steps for upgrading the camera's software and firmware via the web interface.
Lists return messages for VISCA protocol, including ACK, Completion, and Error notifications.
Provides a comprehensive list of VISCA commands for camera control, such as power, zoom, and focus.
Details VISCA commands for controlling auto focus, white balance, and gain settings.
Lists VISCA commands for managing exposure, shutter priority, and iris settings.
Details VISCA commands for controlling backlight compensation and Wide Dynamic Range (WDR).
Provides VISCA commands for adjusting noise reduction levels and gamma settings.
Lists VISCA commands for video system settings and pan/tilt movement control.
Presents a list of VISCA commands used to query camera status and parameters.
Details VISCA inquiry commands for camera settings like brightness, contrast, and flip status.
Provides a comprehensive list of Pelco-D commands for controlling camera movement, zoom, focus, and presets.
Provides a comprehensive list of Pelco-P commands for controlling camera movement, zoom, focus, and presets.
Outlines essential steps for cleaning and maintaining the camera.
Provides solutions for frequent problems like video output, image display, and remote control malfunctions.
Addresses issues related to audio transmission and suggests solutions for enabling audio settings.
Guides on setting up live streaming to Facebook, including DNS and event information.
Explains the process for configuring the camera to stream live video to YouTube.
Details the steps required to integrate the camera stream into Vmix software.
Provides specific instructions for setting up camera streaming within Vmix, including adding inputs.
States the manual's copyright ownership and includes a disclaimer regarding content accuracy.
