FoMaKo -
Focus Your Streaming www.fomako.net
Figure 1.2 Wiring Diagram
1)
After power on and self-checking, the camera will automatically return to the preset 0 position if it’s pre-set.
2)
The default address for the IR remote control is 1#.
If restore the menu to factory defaults, the remote control address will restore to 1#.
1.3
Mounting Brackets
Notes:
Ceiling or wall mounting brackets can only be mounted on template and concrete wall.
For safety reason, plasterboard is not recommended.
1)
Wall Mounting
To Next Page
Loading...