Fora G20 - Obtaining and Recording Results

36
The result of your blood glucose test is shown after the
meter counts to 0. This reading is automatically stored in
the meter.
NOTE
˙Do not push your nger (with blood on it) against the test strip or try to
apply a smeared sample on the test strip.
˙If you do not apply a blood sample to the test strip within 3 minutes, the
meter will automatically turn off. You must remove and reinsert the test
strip to restart the test procedure.
˙The blood should completely ll the conrmation window before the
meter begins to count down. If you nd that the conrmation window is
not lled with blood when the meter is counting, NEVER try to add more
blood to the test strip. Discard the test strip and retest with a new
one.
˙If you have trouble lling the test strip, please contact the customer
service for help.
STEP 5. Obtain an Accurate Result in 7 Seconds