40
USING THE METER MEMORY
Your meter stores the latest 450 results of your blood glucose with date and
time in its memory. It also automatically calculates the averages of your
blood glucose in the intervals of 7, 14, 21, 28, 60 and 90 days. You can
review the results easily by the following steps.
Recall the Stored Test Results
STEP 1.
When the meter is off, press and release the M button.
STEP 2.
Press the M button once by once to recall the test results stored in the meter
consecutively.
STEP 3.
The screen shows “
”. Press the M button again, “01” appears rst and then the
latest glucose result along with date and time will be shown on the screen.
After the last test result, press the M button again and the meter will be turned off.
To Next Page
Loading...
