Fora G20 - Operational Problems

49
1. If the meter does not display a message after inserting a test
strip:
2. If the test does not start after applying the sample:
Problem in Operation
PROBABLE CAUSE
PROBABLE CAUSE
WHAT TO DO
WHAT TO DO
Battery exhausted.
Insufcient blood sample.
Battery incorrectly installed
or absent.
Defective test strip.
Test strip inserted upside
down or incompletely.
Did not apply sample until
"
" is ashing.
Defective meter.
Defective meter.
Replace the battery.
Repeat the test using a new test strip
with larger volume of blood sample.
Check that the battery is correctly
installed.
Repeat the test with a new test strip.
Insert the test strip correctly with the con-
tact bars end rst and "
" facing up.
Repeat the test with a new test strip.
Apply sample only when"
"appears
on the display.
Please contact the customer service for
assistance.
Please contact the customer service for
assistance.