Force-A DUALEX SCIENTIFIC+ - II.4.D. Power Alarm; II.4.E. Management of the Memory

DUALEX SCIENTIFIC+
TM
FORCE-A User’s manual v.3.1
7
II.4.d. Power alarm
In order to avoid a loss of data, a double alarm informs you about the level of the battery.
The first alarm informs you that there is only 20% of the battery power left « Low battery ». You
can continue your measurements for some time (approximately 1 hour).
The second alarm informs that there is only 10% of the battery power left « Empty battery ». To
avoid a loss of data, the device automatically shuts down. Measurements are not possible any
more.
II.4.e. Memory management
The DUALEX SCIENTIFIC+™ manages the capacity of the memory and displays two safety
messages to ask to empty the memory card:
- « memory almost full » between 200 kB and 2 kB free memory left
- « Memory full » with less than 2 kB free memory left (less than 15 measurements).
► If you switch on the DUALEX SCIENTIFIC+™, when only between 200 kB and 2 kB free
memory is available, the following message is displayed:
Press on the button . Download the memory content to a computer. If you go to the submenu
‘measurement’, the message will be displayed a second time.
► When DUALEX SCIENTIFIC+™ is switched on, if less than 2 kB of free memory remains,
the following message is displayed: