Need help?Do you have a question about the Ford 1900 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Cylinders | 3 |
| Fuel Type | Diesel |
| Hydraulic System | Open center |
| Transmission | 8-speed |
| Displacement | 158 ci |
Details on front axle components, toe-in, and clearance for two-wheel drive models.
Information on front axle assembly, including differential, housings, and drives for four-wheel drive models.
Procedure for adjusting differential carrier bearing preload using shims.
Instructions for checking and adjusting ring gear to pinion backlash.
Steps for removing the outer drive unit, including disconnecting tie rods and drag links.
Instructions for disassembling the differential and bevel gears, including removing pinion gear shaft.
Procedure for adjusting differential carrier bearing preload by assembling axle shafts and shims.
Specifics on manual steering gear for the 1710 Offset model, including free play adjustment.
General information on integral hydraulic power assist steering gear and external adjustment of steering wheel free play.
Details on removing the steering gear assembly for models other than 1710 Offset.
Instructions for removing the cylinder head, including draining coolant and removing manifolds.
Details on piston types, ring configurations, and cylinder specifications.
Details on crankshaft support, main bearing types, end play limitations, and crankshaft removal.
Emphasizes the importance of cleanliness when servicing the injection pump.
How to check and adjust injection pump timing using crankshaft pulley marks or a dial indicator.
Steps for removing injector lines, injectors, and precombustion chambers.
Guidelines for overhauling injector nozzles, emphasizing the use of approved cleaning kits and avoiding harsh tools.
Information on alternator types, regulator mounting locations, and general precautions for servicing the electrical system.
How to adjust clutch pedal free travel and PTO clutch release bolts.
To Next Page
