EasyManua.ls Logo

Forematic F350 - User Notices; Manual Operation; Safe Operation; Maintenance & Repair

Forematic F350
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F350/F360 doc. F05
P14
Maintenance & repair
An opener fitted and maintained to these
instructions will give long reliable service.
The door’s running gear must be kept in
good working order. We recommend the
door is operated manually at least once
per month to check for wear. Openers will
hide problems developing within the door
tracks and springs. Faults not attended to
early may develop.
Opener damage resulting from poor main-
tenance is not covered by the warranty.
Spares are available from your dealer. For
safety, only competent persons should be
allowed to fit spare parts.
Programming steps 1,2,3 and 6 should be
repeated if the motor or drive train parts
are replaced. All programming will need
to be repeated if the PCB is replaced.
Garage doors and openers can be dangerous. These safety
warnings are to protect users of automated doors. Cut this
label out and stick it to the door, or download a new copy.
Safe operation
Warning – AUTOMATIC DOOR
Do not let children operate or play with remotes.
Never go under the door when partially open.
Operate the door only when in eye contact.
Keep the door regularly maintained.
Make sure there are no people or objects
in the path of the moving door.
Only authorised and responsible
persons should be allowed to
use the door controls.
Manual operation
A disconnect pull cord is fitted to the rail
to allow the door to open in the unlikely
event of a power failure. Pull once, then
lift the door manually.
The door will re-engage
the drive automatically
on the next cycle.
A door mounted release
is available for releasing
the door from outside.
USER NOTICES
Declaration of Conformity
We hereby declare, that Remote Controlled Garage Door Openers
F-350M, F-350G 240V have been manufactured in accordance with
the following standards or normative documents ;
EN 60335-2-95: 2004
EN 60335-1/A13: 2008/A2: 2006
EN 62233: 2008
EN 61000-3-2: 2006, + A1: 2009 +A2: 2009
EN 61000-3-3: 2008
EN 55014-1: 2006 +A1: 2009 EN 55014-2: 1997 +A2: 2008
EN 50371: 2002
In accordance with the provisions of the following directives
98/37/EC Machinery Directive with amending directives
2006/95/EC LV Directive
2004/108/EEC EMC Directive
1999/5/EC R&TTE Directive
23.03.2011 – FOREMATIC
9 Vanalloys Estate, Stoke Row, Mr H WYNN JONES
Henley RG9 5QW, United Kingdom Director