Forma Scientific 8525 - 2.2 Environmental Conditions

Forma Scientific, Inc.__________________________________________________Contents
vii
3.4 Key Functions Requiring Access Code ................................................3-3
a. Set Point Adjustment Screw..........................................................3-4
3.5 Audible Alarm and Control Panel Indicators........................................3-4
3.6 Double Door Freezer (Factory-Built Option) .......................................3-6
3.7 Set Point Adjustment Screwdriver .......................................................3-6
3.8 Automatic Voltage Compensation System ...........................................3-6
3.9 CoBex Temperature Recorder (optional)..............................................3-7
Section 4 - Start-up
4.1 Setting the Operating Temperature.......................................................4-1
4.2 Setting the Low and High Limit Set Points ..........................................4-1
a. To display or change the Low Limit Set Point...............................4-1
b. To display or change the High Limit Set Point..............................4-2
4.3 General Recommendations ..................................................................4-2
4.4 Preparing the (Optional) CoBex Temperature Recorder.......................4-2
a. Installing the chart recorder battery..............................................4-2
b. Installing the chart paper .............................................................4-3
c. Changing the recorder range ........................................................4-3
d. Calibrating the chart recorder ......................................................4-4
e. Recorder outlet ............................................................................4-4
Section 5 - Calibration
5.1 Calibration...........................................................................................5-1
5.2 Calibrating the Temperature Alarm Monitor Probe..............................5-1
5.3 Calibrating the Control Set Point Temperature Probe ..........................5-2
5.4 Changing the Access Code...................................................................5-3
Section 6 - Routine Maintenance
6.1 Cleaning the Cabinet Exterior...............................................................6-1
6.2 Cleaning the Condenser ........................................................................6-1
6.3 Cleaning the Air Filter..........................................................................6-2
6.4 Defrosting the Chamber........................................................................6-2
6.5 Cleaning the Door Gasket.....................................................................6-3
6.6 Cleaning the Vacuum Relief Port..........................................................6-3
6.7 Replacing the Performance Monitor/Alarm Battery ...............................6-4