Format kappa 40 - Cutting Extension

Panel Saws
kappa 30/kappa 40
Panel Saw
Kappa 30 / kappa 40
Setup and installation
2. 

3. 





!
"
#
Fig. 34: Cutting extension
Fig. 33: Cutting extension
7.3.5 Cutting extension


1. 

!
"
#
$
Attention: It may be neccessary to lift the very rear end of the bar slightly, before screwing the “Cutting
extension 1250” and the stop shaft together.

!
"
#
!
"
#
$
"
