Format kappa 40 - Work Stations; Working Techniques; Authorised Working Techniques

Panel Saw
Kappa 30 / kappa 40
Operation
Warning: Risk of injury!
9.6 Work stations
AP1:
AP2:
AP3:
 

 


Fig. 96: Work stations/Work positions
9.7 Working techniques
9.7.1 Permitted working techniques
Only the following working techniques are allowed with
the circular saw:
 
 

 

 

 
Only the following work techniques are allowed using
the circular saw without a scoring unit:
 
 


AP1
AP2
AP3