Format kappa 40 - Overhead Saw Guard; Adjust the Distance

Panel Saw
Kappa 30 / kappa 40
Making adjustments and preparations
Fig. 66: Splitter thickness (d), saw blade body (S), sawtooth width (D)



Fitting/Changing the splitter

Fig. 67: Splitter Fitting the
1. 
2. 
3. 
 

4. 
!
"





1. 
2. 

3. 
!
"
§
8.13 Overhead saw guard
Fig. 68: Overhead saw guard
8.13.1 Setting the distance

!
"
!
"
#

 