Format kappa 40 - Prepare the Machine to Operate; Saw Blade; Tools

Panel Saws
kappa 30/kappa 40
Panel Saw
Kappa 30 / kappa 40
Making adjustments and preparations
8.10 Saw blade
8.10.1 Tools
Warning! Risk of injury!

 

 
 



kappa 30 kappa 40
  


  
  
  
*
)
350 mm in combination with 120 mm Scoring blade
Attention: Only use original manufacturer tools!
Attention! Minimum tightening torque: 20 Nm!
8.9.2 Preparing the machine to operate
1. 
2. 
3. 
!
"
Fig. 54: Preparing the machine to operate


"
!