USING FORMON SCOPE
CHOOSING THE PRINTING SETTINGS
Resolution - -
ness of the printed layers. Choosing a higher resolution will result in prints with much
better details and much smoother surfaces, but it takes much longer to print.
Inll -
Support - You can activate support by clicking the support check box. Support allows
automatically generated under print layers that require support beneath it to hold the
printed layers up. Usually overhangs with an angle of more than 45 degrees require
Choosing higher resolutions and/or higher inll percentage directly affects
the print time. It will take longer to print a higher resolution model than a
lower resolution model. It will also take longer to print models with higher inll
percentage.
STARTING A PRINT | 26
To Next Page
Loading...