SAFETY MESSAGES
Safety alert symbols in this manual indicate potential safety hazards that could harm
you or others. Please read the safety messages carefully throughout the manual.
Always unplug the printer before performing any kind of maintenance or
modications.
This sign warns of a situation that may cause material damage or injuries if
you do not follow the safety instructions.
This sign provides additional information that are useful to do a certain task
or to avoid problems.
GENERAL SAFETY INFORMATION
The print-head of the Formon Core generates high temperatures and has moving parts
that can cause injury. Never put your hands inside the printer while the printer is in
operation; when you turn it on and it calibrates; when its preparing for print; or while
it is printing. The only time you’re safe to put hands in is when the printer’s startup
calibration is over and you can take the built plate to apply adhesive, or after the print is
Always control the printer with the touch screen display at the front.
Do not change or adjust anything on the Formon Core unless it is authorized by the
manufacturer.
Do not leave Formon Core unattended during operation.
Do not store any item inside the printer.
Children should be under adult supervision when using Formon Core.
SAFETY AND COMPLIANCE | 6
To Next Page
Loading...