Fortuna ES 50 - Cleaning and Maintenance Schedule

Cleaning and maintenance schedule
—————————————————————————————————————–———
———————————————————————————–––––––––––––––––––––––––
Operating Manual Skiving Machine ES 50-UK-V3/24.01.2012 43 von 45
2.6.2 Cleaning and maintenance schedule
Cleaning and maintenance
work to be carried out
Daily Weekly Monthly
Clean machine.
X
Readjust scrap ejector.
X
Clean filter cloth.
X
Empty scrap material bin.
X
Clean and lubricate knife
infeed.
X
Lubricate flat bearing of guide
head.
X
Clean grinding zone.
X
Check suction pipe and clean
it, if it is contaminated.
X
Clean the grid at the suction
pipe "Scrap suction".
X
Clean and lubricate point
suspension of the feed shaft
bearing arm.
X
Check belts and belt tensions
and if they are worn, replace
them with new ones.
X