Foscam FI8918E - MSN Setting

w
w
ww.foscam.co
ww.foscam.co
m
m
Shenzhen
Shenzhen
Foscam
Foscam
Intelligent
Intelligent
Technology
Technology
Co.,
Co.,
Limited
Limited
Tel:
Tel:
86
86
755
755
2674
2674
5668
5668
Fax:
Fax:
86
86
755
755
2674
2674
516
516
8
8
33
.
Figure 3.29
If the test fails with one of the following errors after clicking Test, verify that the information you
entered is correct and again select Test .
1) Cannot connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please
check it and try again
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device
Report Internet IP by Mail—If selected, you will receive emails which contains internet IP
information such as When the camera is powered or the Internet IP has changed. (For example:
IPCAM's urls is http://119.123.207.96:8068). Make sure the port is mapped to the router
correctly.
3.12 MSN Setting
If you want the camera send its current internet IP address to you or your friends, please set
MSN settings.
Acquire an MSN ID for the IPCAM first, then follow the instructions as per Figure 3.30.