Foscam FI9804P - IP Address Setup

w
w
www
www
.foscam.
.foscam.
us
us
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
33
Figure 4.20
4.4 Network
This section will allow you to configure your camera’s IP, PPOE, DDNS, Wireless Settings, UPnP, Port, Mail
Settings and FTP Settings.
4.4.1 IP Configuration
If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same
subnet of your router or computer.
Figure 4.21
Changing settings here is the same as using the IP Camera Tool. It is recommended that you use the subnet
mask, gateway and DNS server from your locally attached PC. If you don’t know the subnet mask, gateway
and DNS server, you can check your computer’s local area connection as follows:
Control PanelNetwork ConnectionsLocal Area Connections  Choose SupportDetails.