www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
another port if you’d like such as 2000 or 8090, which will not be conflict with other existing ports like 25,
21,10000.Here you can set the port no. between 1 and 65535.
Change the default http no.88 to another one.
How to assign a different HTTP Port No. and fixed the LAN IP of the
camera by the IP Camera Tool？
Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on
the IP address, and click on ”Network Configuration”, this brings up the network configuration box as
shown in Figure 2.9 and 2.10.
Figure 2.9
Figure 2.10
Step 2: Enter the username and password of the Administrator (default username is admin with a blank
password), and click “OK” to apply changes.
To Next Page
Loading...
