www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
3 Surveillance Software GUI
Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick
installation, you can take time to learn the operation of the software.
3.1 login Window
Figure 3.1
Section1 Enter the Username and password
The default administrator username is admin with no password, please change the password at first
using and prevent unauthorized users login the camera (read chapter 3.2.4 about how to change).
Section2 Stream
The camera supports two stream modes: Main stream and sub stream. If you want to access the camera
from LAN, here you can select Main stream. If you want to access the camera from Internet, here we
recommend sub stream.
Note: When the network bandwidth is bad you’d better to select Sub Stream and the video will be more
fluent.
Section3 Select the language
You can select the language. And you need to click on the language dropdown list.
Section4 login the camera
Click “login” button.
NOTE：
When setting up your camera for the first time, it will request that you modify the default username
and/or password if both are still set to default. Input the new username and password, click "Modify" to
complete the modification. You will now use the new username and password to login to the camera in
To Next Page
Loading...
