Foscam FI9826P - PoE (Power over Ethernet)

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
2
 Support SD Card storage up to 32GB
 Support IR-Cut auto switch
 Embedded free FOSCAM DDNS(dynamic domain name service) Service
 Supporting the Third Party Domain Name Service
 Support two-way audio
 Support ONVIF protocols
 Multi-level users management with password protection
 Motion detection alert via email or upload image to FTP
 Providing free Android and iPhone APP for viewing live video Providing free Central Management
Software to manage and monitor multiple cameras
 Support record schedule
1.2 PoE (Power over Ethernet)
FI9821EP and FI9831EP are PoE-compliant, allowing transmission of power and data via a single
Ethernet cable. Shown as the following picture: connect the Network Camera to a PoE-enabled Router/
switch via Ethernet cable.
Figure 1.1
1.3 Read Before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the IP Camera is installed, please carefully read and follow the instructions in the Quick
Installation Guide to avoid damage due to faulty assembly and installation. This also ensures the product
is used properly as intended.
1.4 Package Contents
● IP Camera × 1 ● DC Power Adapter × 1
● WI-FI Antenna × 1 （ Except for FI9821EP and
FI9831EP）
● Mounting bracket × 1
● Ethernet Cable × 1 ● CD×1
● Quick Installation Guide × 1 ● Warranty Card × 1