Foscam FI9853EP User Manual

V1.2
1
User
User
Manual
Manual
HD IP Camera
Model: FI9853EP / FI9853 Model: FI9851P

Foscam FI9853EP Specifications

General

Model	FI9853EP
Category	IP Camera
Image Sensor	1/2.7" CMOS
Audio	Built-in microphone
Weatherproof Rating	IP66
Video Compression	H.264
Frame Rate	30fps
Wireless	No
Motion Detection	Yes
Mobile App Support	Foscam App
ONVIF Compliance	Yes
Two-way Audio	Yes
Connectivity	Ethernet
Network Interface	10/100M Ethernet
Resolution	1920x1080 (1080P)
Operating Temperature	-20°C to 60°C

Summary

1 Overviews

1.1 Key Features

Lists the key features of the HD IP Camera, including H.264 compression, resolution, and network protocols.

1.5 Physical Description

1.5.1 Front Panel

Details the components of the camera's front panel, including the Infrared Lamp Array, Lens, and Induction IC.

1.5.2 Interface

Describes the camera's interface connections, specifically the Power Interface and LAN port.

2 Accessing the Network Camera

2.1 Access the Camera in LAN

Guides users on how to access the camera within the Local Area Network (LAN) using HTTP and HTTPS protocols.

2.2 Access the Camera in WAN

2.2.1 Static IP Addresses

Explains how to access the camera remotely using a static IP address and port forwarding.

Access your IP Camera from the Internet

2.2.2 Dynamic IP Addresses

What is Port forwarding ?

How do we configure Port Forwarding?

First method : Use the embedded DDNS to access the camera via the Internet

Second method: Use the Third party DDNS to access the camera via the Internet

2.3 Using the VLC player

3 Surveillance Software GUI

3.1 Login Window

Details the components of the login window, including username, password, stream selection, and language settings.

3.2 Setup Wizard

3.3 Surveillance Window

Interface Overview

Video and Display Controls

OSD and Playback Controls

4 Advanced Camera Settings

4.1 Device Status

Describes the Device Status section, which displays camera information, status, session status, and logs.

4.1.1 Device Information

4.1.2 Device Status

4.1.3 Session status

4.1.4 Log

4.2 Basic Settings

4.2.3 User Accounts

4.2.4 Multi-Camera

Add cameras in LAN

Explains how to add other cameras found in the LAN to the multi-device settings for monitoring.

4.3 Network

4.3.1 IP Configuration

Guides on setting a static IP address for the camera, ensuring it's in the same subnet as the router.

4.3.2 Wireless Settings (FI9851P)

Details how to configure wireless settings for the FI9851P camera, including scanning and connecting to Wi-Fi networks.

4.3.4 DDNS

FOSCAM domain name

Details how to find and use the camera's embedded FOSCAM DDNS domain name for internet access.

Third Party Domain Name Settings

Guides on using third-party DDNS services like no-ip.com, including registration and hostname creation.

② Do port forwarding within the router

4.3.5 UPnP

4.3.6 Port

RTSP function

4.3.7 Mail Settings

4.3.8 FTP Settings

4.4 Video

4.4.1 Video Settings

Details main and sub-stream video settings, including stream type, resolution, bit rate, and frame rate.

4.4.3 Privacy Zone

There are two options: Yes or NO. Select Yes, then click "Set Privacy Zone" and draw a privacy area on the video, the privacy area will be black on the video.

4.5 Alarm

Motion Detection

Explains that the camera supports motion detection alarms, sending emails or uploading images to FTP.

To enable motion detection, follow the steps below:

5 Set Detection Area

6 Alarm Schedule

② Specify an alarm schedule

③ Press the left mouse and drag it on the time boxes, you can select the serial area,

4.6 Record

4.7 Firewall

4.8 System

4.8.2 System Upgrade

Details how to download and install the latest firmware for the camera.

Upgrade Firmware by IP Camera Tool

4.8.4 Factory Reset

5.1.4 I have forgotten the administrator password

5.1.5 Camera can not record

5.1.6 Subnet doesn't match

5.1.7 No Pictures Problems

5.1.8 Can't access IP camera in internet

5.1.9 UPnP always failed

5.1.10 Camera can not connect wireless

5.1.11 Can't see other cameras listed in multi-device when using remote access

6 Obtaining Technical Support