3
C. Setting Up Your Camera: Wired Connection via Foscam App
(Recommended)
Note: We highly recommend that you first begin the setup process by connecting your camera to your
Internet router with an Ethernet cable. After setup is successful, you’ll be able to unplug the cable and
login to your wireless network for WiFi operability.
Minimum Requirements: To help ensure a smoother video experience on the smartphone, it’s
recommended that your smartphone has the following:
iOS: version 8.1 or higher.
Android: 4.1 or higher, using a device with a Graphics Processing Unit (GPU) function.
Camera Setup Steps
1.
Please mount the antenna and make sure it is in a vertical upright position.
2.
Connect the camera to your Internet router using an Ethernet cable.
3.
Connect the power adapter to the camera, and wait for a few moments until the camera alerts you
that the “Wired connection succeeded.”
4.
From your smartphone, search for “Foscam App” via the App Store or Google Play Store.
Download, install and open the app to begin configuration.
5.
Under “My Cameras,” select “Tap + to add new camera” and then scan the QR code, which is
located at the bottom of your camera (see screenshots below).
To Next Page
Loading...
Need help?
General
