Fox FLOAT X2 User Manual

6
recommended settings
Use your air spring pressure in the table to find the suggested starting RVS
damper settings for your shock.
Turn all four damper adjusters to the closed position (full clockwise) until they
stop. Then back them out (counter-clockwise) to the number of clicks shown in
the table.
*Count clicks from Closed: 0 Clicks = Closed*
Air Spring
Pressure
Recommended
LSR setting
Recommended
HSR setting
Recommended
LSC setting
Recommended
HSC setting
90 16-18 7-8 16-18 7-8
100 15-17 7-8 16-18 7-8
110 14-16 6-7 15-17 7-8
120 13-15 6-7 15-17 7-8
130 12-14 5-6 14-16 6-7
140 11-13 5-6 14-16 6-7
150 10-12 5-6 13-15 6-7
160 9-11 4-5 13-15 6-7
170 8-10 4-5 12-14 5-6
180 7-9 4-5 11-13 5-6
190 7-9 3-4 10-12 5-6
200 6-8 3-4 9-11 4-5
210 6-8 3-4 8-10 4-5
220 5-7 2-3 7-9 4-5
230 4-6 2-3 6-8 4-5
240 3-5 2-3 5-7 3-4
250 2-4 2-3 4-6 3-4
260 2-4 1-2 2-4 3-4
270 1-3 1-2 2-4 3-4
280 1-3 1-2 2-4 2-3
290 1-3 0-1 1-3 2-3
300 1-2 0-1 1-3 2-3

Fox FLOAT X2 Specifications

General

Type	Rear Shock
Shaft Material	Aluminum
Body Material	Aluminum
Spring Type	Air
Adjustments	Low-speed compression, high-speed compression, low-speed rebound, high-speed rebound
Air Spring	EVOL
Sizes	Available in various eye-to-eye lengths and stroke sizes
Intended Use	Enduro, Downhill
Travel	Varies (depends on bike model)
Compatibility	Designed for frames that accommodate metric or imperial sized rear shocks. Compatible with frames designed for Trunnion or standard eyelet mounting.