Fox PERFORMANCE 2.0 Series - Page 9

605-01-414 REV A 7
Fig. 6: Mounted Performance Elite Reservoir. Fig. 7: Mounted Performance Series Reservoir.
FENDER LINER TRIMMING
NOTICE: Fender liner trimming is required for
Performance Elite applications to ensure correct
fitment.
1. Test fit the fender liner and assess how much
trimming is required. Draw a cut line on the
fender liner (Fig. 8).
2. Remove the fender liner and begin with a
conservative cut. Repeat test fitting and cutting
until you’ve achieved the desired appearance
and adequate access to the DSC EVO adjustment
knobs (Fig. 9).
Fig. 8: Test fit the fender liner.
Fig. 9: Example of a cut fender liner.