Foxconn 661M03 Series User Manual

This manual is the intellectual property of Foxconn, Inc. Although the
information in this manual may be changed or modified at any time,
Foxconn does not obligate itself to inform the user of these changes.
Statement:
All trademarks are the property of their respective owners.
Intel
®
and Pentium
®
are registered trademarks of Intel Corporation.
PS/2 and OS/2 is the registered trademarks of IBM, Inc.
Windows
®
95/98/2000/NT/XP is the registered trademark of Microsoft.
Award
®
is the registered trademark of Award, Inc.
User’s Manual V1.0 in English for 661M03 series motherboard.
P/N:91-181-613-11-43
Symbol description:
Note: refers to important information that can help you to use motherboard
better.
Attention: indicates that it may damage hardware or cause data loss,
and tells you how to avoid such problems.
Warning: means that a potential risk of property damage or physical
injury exists.
More information:
If you want more information about our products, please visit Foxconn’s
website: www.foxconnchannel.com
Version:
Trademark:
1

Foxconn 661M03 Series Specifications

General

Form Factor	Micro ATX
Model	661M03 Series
CPU Socket	Socket 478
Max Memory	2 GB
Memory Type	DDR SDRAM
Expansion Slots	1 x AGP 8X, 3 x PCI
Chipset	SiS 661FX
Supported Processors	Intel Pentium 4 / Celeron
FSB	400/533/800 MHz
Memory Slots	2
Memory Speed	DDR 400/333/266
Storage	2 x SATA
Audio	6-Channel
LAN	10/100 Mbps Ethernet

Summary

Chapter 1 Product Introduction

Main Features Overview

Details the key specifications and capabilities of the motherboard, including size, processor, and chipset.

Motherboard Layout Identification

Identifies and describes the physical components and connectors on the motherboard.

Chapter 2 Installation Instructions

CPU and Fan Installation

Guides on how to install the CPU and its cooling fan onto the motherboard.

Memory Module Installation

Provides instructions for installing memory modules (DIMMs) into the motherboard slots.

ATX Power Supply Connection

Details how to connect the ATX power supply to the motherboard connectors.

Rear Panel Ports Identification

Describes the ports and connectors located on the motherboard's rear panel.

Internal Connectors and Headers

Explains the various internal connectors on the motherboard like FDD, IDE, and USB headers.

Expansion Slot Usage

Covers the installation and use of PCI, AGP, and CNR expansion slots.

Motherboard Jumper Settings

Explains the purpose and settings of various jumpers on the motherboard.

System Operation and Shutdown

First Time Startup Procedures

Guides on the initial startup process after installing hardware and entering BIOS.

Powering Off the Computer

Explains the correct procedures for shutting down the computer using OS or power switch.

Chapter 3 BIOS Description

Accessing BIOS Setup Utility

Instructions on how to access the BIOS Setup utility during system startup.

BIOS Main Menu Navigation

Standard CMOS Features

BIOS Features

Advanced BIOS Features

Advanced Chipset Features

Integrated Peripherals

Power Management Setup

PnP/PCI Configurations

PC Health Status

Frequency/Voltage Control

Load Fail-Safe Defaults

Load Optimized Defaults

Set Password

Save & Exit Setup

Exit Without Saving

Chapter 4 Driver CD Introduction

Installing Drivers from CD

Chapter 5 Bundled Software Usage

SuperStep Utility Guide

Chapter 6 Special BIOS Functions

SuperSpeed BIOS Function

SuperRecovery Utility