To Next Page

To Previous Page

4. It then goes to “Disks” item. Press <Enter> to display the hard disks list for this RAID0

second volume system.

5. From the hard disk list, select the previously congured RAID0 hard disks, and press

<Space> key to select them. Two signs will appear to indicate the selections. Press

<Enter> to continue.

Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5

Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032

Name:

RAID Level:

TryRAID0-1

RAID0(Stripe)

Port Drive Model Serial # Size Status

0 Hitachi HDS721616PLAHitachi HDS721616PLA

PVF904�21G2J�M 149.0GB Non-RAID Disk

ST380811AS

5PS1TAGW 74.5GB Non-RAID Disk Non-RAID DiskNon-RAID Disk

SAMSUNG HD161HJ

S0V3J9APA30524 149.0GB Member DiskS0V3J9APA30524 149.0GB Member Disk 149.0GB Member Disk Member DiskMember Disk

ST380815AS

5RW1CA37

74.5GB Non-RAID Disk Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done

[ SELECT DISKS ]

0 Hitachi HDS721616PLA PVF904�21G2J�M 149.0GB Member Disk

[ CREATE VOLUME MENU ]

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select