To Next Page

To Previous Page

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the

BIOS parameters is critical to maintain optimal system performance. Power on the computer,

when the message "Press <Del> to enter Setup, <ESC> to boot menu" appears at the bottom

of the screen, you can press <DEL> key to enter Setup.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.

Use the arrow keys to select a specic item and press <Enter> to go to the sub-menu.

Each item in the main menu is explained below:

► System Information

It displays the basic system conguration, such as BIOS Version, CPU Name, memory size

plus system date, time and Floppy drive. They all can be viewed or set up through this menu.

► Central Control Unit

Some special proprietary features can be set up through this menu.

► Advanced BIOS Features

The advanced system features can be set up through this menu.

► Advanced Chipset Features

The values for the chipset can be changed through this menu, and the system performance

can be optimized.

► Integrated Peripherals

All onboard peripherals can be set up through this menu. There are Super I/O devices such as

Serial I/O and other USB devices... etc.

We do not suggest that you change the default values in the BIOS Setup, and we

shall not be responsible for any damage which resulted from the change you made.

► System Information ► PnP/PCI Conguration

► Central Control Unit ► PC Health Status

► Advanced BIOS Features ► BIOS Security Features

► Advanced Chipset Features Load Optimal Defaults

► Integrated Peripherals Save Changes and Exit

► Power Management Setup Discard Changes and Exit

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

Configure Time and Date. Display System Information...

► System Information

Foxconn G43MX Series User Manual

Questions and Answers: