To Next Page

To Previous Page

USB Conguration

USB Devices Enabled :

Help Item

1 Keyboard, 1 Mouse

Enables support for

Legacy USB Support [Enabled]

legacy USB

USB 2.0 Controller Mode [High Speed]

BIOS EHCI Hand-Off [Enabled]

► USB Storage Conguration

[Press Enter]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Enabled]

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB

keyboard or mouse, set to auto or enabled.

► USB 2.0 Controller Mode

This item is used to set the transmission rate mode of USB 2.0. The available settings are :

[High Speed] in 480Mbps; [Full Speed] in 12Mbps.

► BIOS EHCI Hand-Off

Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI)

specication, but there are a few features that are not implemented. Microsoft said preliminary

support for EHCI BIOS handoff will be available in Windows XP SP2.

This item allows you to enable support for OS without EHCI hand-off feature.

This is a workaround for OS without EHCI hand-Off support .

The EHCI ownership change should claim by EHCI driver.

If USB devices are connected to the computer, the following item will appear :

► USB Storage Configuration

After pressing <Enter>, you can set the reset delay for the USB mass storage device. There

are many different emulation types of this USB device, such as oppy, hard disk and CDROM

can be selected.

Foxconn G45M Series User Manual

Questions and Answers: