Foxconn M61PMV Series - Performance Tuning with Fox Central Control

3
23
Fox Central Control Unit
► Smart BIOS / Fox Intelligent Overclock / Memory Timing Setting
Press [Enter] to get into each submenu.
► Memory Voltage
This item is used to change the voltage of memory group(1.8V). The default option is: [Default].
► K8<->NB HT Speed
HT stands for HyperTransport bus. The CPU<->NB HT Speed option controls the physical
speed of the CPU to Northbridge HT link. The settings are [Auto], [200 MHz], [400 MHz], [800
MHz] and [1 GHz].
► K8<->NB HT Width
The CPU<->NB HT Width controls the CPU to Northbridge link bandwidth, it is highly
recommended to set to [Auto] for overall performance.
► PCIE Spread Spectrum
This option is used to enable or disable the PCIE spread spectrum function. If you enabled this
function, it can signicantly reduce the EMI (Electromagnetic Interference) generated by the
system, so to comply with FCC regulation.
► CPU Spread Spectrum
This option is used to enable or disable clock generator spread spectrum. If you enabled this
function, it can signicantly reduce the EMI (Electromagnetic Interference) generated by the
system, so to comply with FCC regulation. But if overclocking is activated, you had better dis-
able it.
► AMD K8 Cool&Quiet Control (Appears only when CPU support)
This option helps lowering down the CPU frequency and voltage when system is idling. When
the CPU speed is slowing down, the temperature will drop as well. This option will be displayed
only if your CPU is supporting this feature.
► AMD Family 10th Down Core (Appears only when CPU support)
At this moment, AMD family 10 series is equivalent to AM2+, and most CPU in this series are
Quad Cores. This option enables shutting down portions of the circuits in core when not in load,
it is a new feature of AM2+ CPU. This option will be displayed only if your CPU is supporting
this feature.
Phoenix - AwardBIOS CMOS Setup Utility
Fox Central Control Unit
► Smart BIOS [Press Enter] Item Help
► Fox Intelligent Overclock [Press Enter]
► Memory Timing Setting [Press Enter] Menu Level ►
Memory Voltage [Default]
K8<->NB HT Speed [Auto]
K8<->NB HT Width [Auto]
PCIE Spread Spectrum [Disabled]
CPU Spread Spectrum [Disabled]
AMD K8 Cool&Quiet Control [Auto]
Super BIOS Protect
[Disabled]
Auto Detect PCI CIK
[Disabled]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimized Defaults
Press Enter