5
71
1. Find a PC, put a diskette into its oppy
drive A:, this diskette will be formatted later.
Put the driver CD into its DVD-ROM drive.
2. Depending on which platform your XP
system is, normally, it is a 32-bit system.
Use Windows explorer, and go to CD:\
Driver\NVIDIA\MCP61\Chipset\WinXP\
32bit\IDE\WinXP\sataraid\Floppy\
Disk1, click on RaidTool icon to start the
creation.
3. Click "GO" to start.
4. Select the desired destination FDD drive.
It can be the default drive A: or any USB
FDD. Click "OK" to continue.
5. Insert a diskette, click "OK" to continue.
5-1 Create two RAID Driver Diskettes
If you want to install a brand new Windows XP on a RAID system, you need to create two
RAID driver oppy diskettes which will be used during Windows XP installation later.
To Next Page
Loading...
