Foxconn MARS - Page 23

16
2
Exclusive Graphics power Connector : PWR3
This connector is an auxiliary power for graphics card.
Exclusive power for graphics card is for better graphics
performance and future upgrade usage.
IDE Connector : PIDE
With the provided Ultra DMA133/100/66 IDE ribbon cable,
you can connect to any IDE type of hard disk and CD/DVD
ROM/RW drive. You also can congure as a disk array
through the JMicron RAID controller.
Floppy Disk Drive Connector : FLOPPY
This motherboard includes a standard oppy disk drive(FDD)
connector, supporting 360KB, 720KB,1.2MB, 1.44MB, and
2.88MB FDDs.
Pin # Denition Pin # Denition
1 GND 5 +12V
2 GND 6 +12V
3 GND 7 +12V
4 GND 8 +12V
+5V
GND
GND
+12V
1
4
Connect a 4-pin
power plug
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
C
A
U
T
I
O
N
!
PWR3
8-pin ATX 12 V Power Connector : PWR2
The 8-pin ATX 12V power supply connects to PWR2 and provides power to the CPU.
1
4
5
8
PWR2
GND
+12V