Foxconn MARS - Overclocking

50
4
Aegis is a very important system monitoring program, so when
you click cross icon on it, Aegis only goes to notication area
of the taskbar, but does not stop running. If you really want to
close it, you must right click on it on the notication area, and
select exit to make it.
Open : Open Aegis Panel main panel on the screen.
Congure : Open Aegis Panel and directly enter congure mode.
Exit : Close Aegis program.
2. Overclocking
Click on "Foxconn" button to open/close the display screen. The information of CPU, memory,
and PCIE clocks are displayed.
Click on green button to go to Control Panel. Click on OC icon to visit Overclocking menu which
allows you to overclock your CPU and PCI bus manually.
Open/Close
screen