Foxconn MARS - Integrated Peripherals

29
3
Integrated Peripherals
► OnChip IDE Device/Onboard Device Control /USB Device Setting
Press <Enter> to go to relative submenu, please refer to the next sections.
► Onboard Lan Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.
► Onboard FDC Controller
This item is used to enable or disable the onboard FDC controller.
► Onboard Serial Port 1
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.
► Onboard IrDA Device
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard IrDA
device.
► UR2 Duplex Mode
This item enables you to determine the infrared function of the onboard infrared chip.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
► OnChip IDE Device Press Enter Item Help
► Onboard Device Control
Press Enter
► USB Device Setting
Press Enter Menu Level ►
Onboard Lan Boot ROM
Disabled
Onboard FDC Controller
Enabled
Onboard Serial Port 1
3F8/IRQ4
Onboard IrDA Device
2F8/IRQ3
UR2 Duplex Mode
Half
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Press Enter