Foxconn MARS - Configuring System Settings

24
3
Standard CMOS Features
This submenu is used to set up the standard BIOS features, such as the date, time, oppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
► Date - <weekday><month><date> <year> format
Day—weekday from Sun. to Sat., automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.
Use <Enter>, <Tab> keys to select a eld. Use <+>, <->, <PageUp> or <PageDown> to select
a value.
► Time - <hour> : <minute> : <second> format
This item allows you to congure the desired time. Use <Enter>, <Tab> to move forward and
select a eld. Directly input a value or use <PageUp>, <PageDown>, <+> or <-> to select a
value.
► SATA Channel 1/2/3/4/5/6, IDE Channel Master/Slave, e-SATA Channel
These categories identify the hard disks connected to the Intel
®
ICH9R and JMicron controllers
in the system. In each channel’s display, you can press [Enter] to go to its submenu. You can
further congure specic drive settings.
[None], [Auto], and [Manual]. “None” means no HDD is installed or set; “Auto” means the
system can auto-detect the hard disk when booting up; by choosing “Manual” and changing
Access Mode to “CHS”, the related information should be entered manually.
In Access Mode setting, selections of [CHS], [LBA], [Lage] and [Auto] can help you to select
hard drive for legacy compatibility.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Nov 7 2007 ▲ Item Help
Time (hh:mm:ss) 17 : 44 : 13
█
█
Menu Level ►
► SATA Channel 1 WDC WD2500JS-60NCB1 █
► SATA Channel 2
None █ Press [Enter] to enter
► SATA Channel 3
Maxtor 6L250S0 █ next page for detail
► SATA Channel 4
None █ hard drive settings
► SATA Channel 5 ST3320620SV
█
► SATA Channel 6 ST3300831AS
█
► IDE Channel Master
None █
► IDE Channel Slave
None █
► e-SATA Channel
None █
█
Drive A
1.44M, 3.5 in. █
█
Video EGA/VGA █
Halt On All Errors ▒
BIOS ID P35A04.F1.P.09.MARS ▒
▼
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
WDC WD2500BB-22FTA0