Foxconn MARS - Virtualization Technology

40
3
CPUID MaxVal to 3. Should be [Disabled] for WinXP.
► C1E Function
C1E represents Enhanced HALT State. It is a feature which Intel CPU uses to reduce power
consumption when in halt state. C1E drops the CPU's multiplier and voltage to lower levels
when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.
► Execute Disable Bit
This item is used to enable/disable the Execute Disable Bit feature.
Intel's Execute Disable Bit functionality can help prevent certain classes of malicious buffer
overow attacks when combined with a supporting operating system.
Execute Disable Bit allows the processor to classify areas in memory by where application
code can execute and where it cannot. When a malicious worm attempts to insert code in the
buffer, the processor disables code execution, preventing damage and worm propagation.
Replacing older computers with Execute Disable Bit-enabled systems can halt worm attacks,
reducing the need for virus-related repairs. By combining Execute Disable Bit with anti-virus,
rewall, spyware removal, e-mail ltering software, and other network security measures, IT
managers can free IT resources for other initiatives.
► Frequency Unlimit
It means the processor is not ratio locked and has no factory congured maximum ratio limit
on the Smitheld XE multi-processing CPU core.
► Core Multi-Processing
When disabled, it will disable one execution core of each CPU die. It is going to provide
backward compatibility, any way, keep it enabled.
► Virtualization Technology
Virtualization (i.e. Intel
®
Vanderpool Technology) allows a platform to run multiple operating
systems and applications in independent partitions or “containers.” One physical compute
system can function as multiple “virtual” systems. Vanderpool Technology can help improve
future virtualization solutions. This item will be displayed only when the CPU is supporting this
feature and the setting is used to enable/disable it.
Memory Timing Cong
Phoenix - AwardBIOS CMOS Setup Utility
Memory Timing Cong
DRAM Timing Selectable By SPD Item Help
CAS Latency Time (tCL) Auto
RAS# to CAS# Delay (tRCD) Auto
Menu Level ►
RAS# Precharge (tRP) Auto
Prechange delay (tRAS) Auto
Write to Precharge(tWR) Auto
Row Refresh Cycle(tRFC) Auto
Write to Read Delay(tWTR) Auto
Row to Row Delay(tRRD) Auto
Read to Precharge(tRPT) Auto
Fast Chip Select
Auto
Clock Per Command
Auto
Memory Channel0 DLL Adjust Auto
Memory Channel1 DLL Adjust Auto
Refresh Count Adjust Auto
Performance Level Auto
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
By SPD