Foxconn MARS - Page 42

35
3
Power On Function Menu
► Wake- Up by PCI card
This item is used to set the system to wake up by PCI card.
► Power On by Ring
If this item is enabled, it allows the system to resume from a software power down or power
saving mode whenever there is an incoming call to an installed fax. This function needs to be
supported by the relevant hardware and software.
► USB KB WakeUp From S3
This item is used to set the system to wake up by USB equipment when it is in S3(Suspend to
RAM) mode.
► Power On by Mouse
When enabled, it allows you to use the PS/2 mouse to wake up the system from soft off and
green mode. This feature requires an ATX power supply.
► Power On by Keyboard
This item allows you to use the PS/2 keyboard to wake up the system from soft off and green
mode. This feature requires an ATX power supply. The setting values: [Disabled]; [Ctrl+ESC];
[Ctrl+F1]; [Ctrl+Space]; [Any Key].
Phoenix - AwardBIOS CMOS Setup Utility
Power On Function
Wake-Up by PCI card Disabled Item Help
Power On by Ring
Disabled
USB KB Wakeup From S3
Disabled Menu Level ►
Power On by Mouse
Disabled
Power On by Keyboard
Disabled
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Disabled