Foxconn MARS - Page 50

43
3
OC Gear
*************OC Gear**************
► Current Storage Gear
We have more spaces in CMOS to allow you to store up to 4 sets of BIOS conguration data.
You can change any setting of BIOS, including the overclocking information, and save the
whole BIOS settings to one of four storage area. Later, you can retrieve BIOS settings by
restore it. This item is used to choose storage section to store your BIOS settings. Setting
values: [Not Use It]; [Storage Gear 1]; [Storage Gear 2]; [Storage Gear 3]; [Storage Gear 4].
► Store/Restore/Clear My Setting
This item allows you to Store/Restore/Clear the BIOS settings. See the help string in “Item
Help” table for detail.
********Foxconn Function********
► Smart Boot menu
This item is used to enable or disable the smart boot menu.
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On Self Test (POST). The LED is located at the front panel, which can display POST
state by using different long-short blinking intervals. You can always leave this state enabled.
Phoenix - AwardBIOS CMOS Setup Utility
OC Gear
*************** OC Gear *************** Item Help
Current Storage Gear Not Use It
x Storage My Setting Store Menu Level ►
x Restore My Setting Restore
x Clear My Setting Clear Choose storage section
1 or 2 or 3 or 4 to
********** Foxconn Function ********** store your over clock
Smart Boot Menu
Disabled setting. If you store
Smart Power LED
Enabled your setting to
Current Storage Gear
successfully, then the
Storage Gear will
turn to Green color
If you clear the
Current Storage Gear
successfully, then the
color will turn back
to normal.
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Not Use It