8.
Decommissioning
8.1
Dismantling the Inverter
Disconnect the inverter from DC Input and AC output. Wait for 5 minutes for
de-energizing.
Disconnect communication and optional connection wirings. Remove the
inverter from the bracket.
Remove the bracket if necessary.
8.2
Packaging
If possible, please pack the inverter with the original packaging.
If it is no longer available, you can also use an equivalent box that meets the
following requirements.
Suitable for loads more than 30 kg.
Contains handle.
Can be fully closed.
8.3
Storage and Transportation
Store the inverter in dry place where ambient temperatures are always
between -40C - +70C. Take care of the inverter during the storage and
transportation, keep less than 4 cartons in one stack.
When the inverter or other related components need to be disposed, please
ensure it iscarried out according to local waste handling regulations. Please be
sure to
deliver any inverter that needs to be disposed of to sites that are appropriate for the
disposal in accordance with local regulations.
To Next Page
Loading...
