10
5. On the keypad area, to the upper right is the back/menu button.
6. In the middle of the keypad is a large button. Directly above and
below the large button are the scroll up and scroll down
buttons.
7. The mute button is located under and to the right of the scroll
down button.
8. User button 2 is located under the mute button.
9. The lanyard loop is located on the very bottom of the remote.
10. The auxiliary button is located directly under the scroll down
button.
11. User 1 button is located to the left of the User 2 button.
12. The FOXPITCH button is located directly above the User 1
button.
13. In the middle of the keypad is a large button. Directly to the left
and right of this button are the volume up and down buttons.
Volume down is located to the left and volume up is located to
the right.
14. The play/select button is in the middle of the keypad.
15. The power button is located on the upper left of the keypad.
16. The volume level indicator is located to the left of the battery
level indicator on the screen.
17. The mute status indicator is in the bottom left corner of the
screen, to the left of the volume level indicator.
18. On the back of the remote is the battery compartment door.
Also, in the battery compartment, is the USB port.
Installing Batteries in the HellCat Pro Remote
The HellCat Pro remote requires 3 ‘AA’ batteries. It is recommended
that you use high-quality lithium or alkaline batteries for the best
performance. To install the batteries, remote the battery compartment
door from the back of the remote. Place the batteries in each slot while
To Next Page
Loading...
