NT200 OBDII/EOBD Code Reader User’s Guide_English Version_V1.10
1. Locate the diagnostic interface on vehicle.
2. Plug in the code reader’s OBDII connector to the DLC.
NOTE A plastic DLC cover may be found on some vehicles.
Remove the cover before plugging the OBD2 cable.
System Setup
System Setup
allows you to:
● Select menu languages.
● Change measurement unit.
● Adjust display contrast.
√
System Setup
settings remain until change to the
existing setups are made.
To do system setup:
1. Press the SCROLL key to enter
System Setup
from
home screen.
√ Follow on-screen instructions to program the code
reader to meet your specific needs.
Changing Language
√ The code reader is set to display English menus by
default.
To change menu language:
1. Use the SCROLL key to pick Language from
System
Setup
screen.
2. Press the YES/NO key to confirm.
System Setup
Language
Measurement Unit
Contrast
Exit
To Next Page
Loading...
