Foxwell NT200 - Page 14

NT200 OBDII/EOBD Code Reader User’s Guide_English Version_V1.10
14
3. Use the SCROLL key to select desired language.
4. Press the YES/NO key to save language setting and
return.
Changing Measurement Unit
√ Metric is the default measurement unit.
To change measurement unit:
1. Use the SCROLL key to select Measurement Unit from
System Setup screen.
2. Press the YES/NO key to confirm.
3. Use the SCROLL key to select desired measurement
unit.
System Setup
Language
Measurement Unit
Contrast
Exit
System Setup
Language
Measurement Unit
Contrast
Exit
Language
English
Espanol
Francais