Foxwell NT200 - Page 15

NT200 OBDII/EOBD Code Reader User’s Guide_English Version_V1.10
15
4. Press the YES/NO key to save measurement setting
and return.
Adjusting Display Contrast
To adjust display contrast:
1. Use the SCROLL key to select Contrast from System
Setup screen.
2. Press the YES/NO key to confirm.
3. Use the SCROLL key to adjust contrast.
4. Press the YES/NO key to save contrast setting and
return.
Exiting System Setup
To quit system setup:
1. Use the SCROLL key to move Exit from System Setup
screen.
2. Press the YES/NO key to confirm and exit.
Measurement Unit
English
Metric
System Setup
Language
Measurement Unit
Contrast
Exit
Contrast
Contrast (30%)
[SCROLL] – Adjust
[YES/NO] – Save