104
15 ADDITIONAL TOPICS
SHORTCUTS
The Axe-Fx III has several shortcuts and hidden features. These are summarized below.
IN GENERAL
To show the Layout Grid for the current preset, push the VALUE wheel.
Press EDIT to jump to the Edit menu for the currently selected block.
ON THE HOME PAGE
Press ENTER to show the Layout Grid for the current preset.
Use NAV LEFT/RIGHT to select presets and press NAV UP/DOWN or turn knob A to select scenes.
IN THE AMP BLOCK
On the Output EQ page, press ENTER to flatten the EQ.
On the Output EQ page, press NAV UP/DOWN to change the number of bands.
IN THE CAB BLOCK
NAV to the Cab Number eld and press ENTER to enter the Cab Picker for the selected.
ON THE GRID
With any block selected, press-and-hold ENTER to create a series of shunts and cables to bridge
empty space to the right. This will also CLEAR existing connectors between a series of blocks.
IN THE EDIT MENU OF ANY BLOCK
Press EDIT to skip to the Edit menu of the next block, or multiple times to step through all blocks.
TO OPEN THE CONTROLLERS MENU
Press the TEMPO button once.
ON THE SEQUENCER PAGE OF THE CONTROLLERS MENU
With any Stage selected, press ENTER to randomize the values of all stages.
To Next Page
Loading...
