21
4 LAYOUTS & SWITCHES
EDIT A SWITCH
Select any switch on the Edit Layout page (see p.20) and press
EDIT SWITCH or ENTER to open the selected switch for deeper editing.
The Edit Switch view has two pages: one for its Tap function and one for its Hold function.
Each page shows the current Category and the Function for the switch,
plus any and all parameters for the current function.
Use the A, B, C, D, and E knobs or the NAV buttons and VALUE wheel to make changes.
On the Tap page, you can also change the Switch Ring Color for an
individual switch, overriding the usual default Category color.
You can also select from different automatic “labels” for the Mini-Display, or even enter custom text.
Details on the various label options are provided throughout Section 5: Footswitch Functions.
RESET TAP
Edit Layout 5: PRESETS / Switch 5 Tap HoldTap
TAP FUNCTION
Category
Function
Preset
Mini-Display Label
Switch Ring Color
LAYOUT LINK
FC#1
FC#2
FC#3
FC#4
Preset
Select in Bank
5
Name
Default
--
--
--
--
See Section 5: Footswitch Functions for information on all categories, functions, and parameters.
The LAYOUT LINK section allows the Tap or Hold function of the switch to ALSO change the Layout
on up to four connected FC units. See “The Layout Link Feature” on p. 38 for details.
The RESET button (Push-knob A) clears the function and all customization from the current page.
(A conrmation screen requires you to press ENTER rst.)
To Next Page
Loading...
