Framery O
5. Place the upper fold of the roof body cover into the installation groove on the right-hand
side of the roof.
Note: If you installed the power cord to the roof module, guide the power cord
out of the cut in the cover.
6. Pull the body cover outwards and downwards at the same time. Push the lower fold of
the body cover into the lower installation groove.
Note: Align the cover to the door frame. Make sure that there are no gaps
between the body cover and the door frame. Make sure that the body cover is
installed evenly and aligned correctly.
Complete care instructions
info@frameryacoustics.com
49
To Next Page
Loading...
