Why no Err04 when Franke Dispenser hopper is empty?
If the hopper in your Franke Dispenser is empty but error message Err04 isn't showing, the "Low product" sensor may be soiled. Clean the "Low product" sensor.
Why is the basket symbol not lit on Franke F3D3 Dispenser?
If the basket symbol on your Franke Dispenser isn't lighting up, it means the dispenser lane is switched off. Press the ON/OFF button for 4 seconds until the button LEDs light up.
Why won't the filler doors open on my Franke F3D3?
If the filler doors on your Franke Dispenser aren't opening to dispense fries, wait for the BASKET symbol to light up. Once it does, the fries will be dispensed.
Why can't I change the load size on my Franke Dispenser?
You can't change the load size on the Franke Dispenser operator panel if the filling process isn't finished yet. The filling process is complete when the BASKET symbol LEDs light up and [Ready] appears on the screen. Then you can change the load size.
What to do if filler doors won't close on Franke F3D3 Dispenser?
If the filler doors on your Franke Dispenser aren't closing after dispensing fries, it's likely that fries are jammed in the filler doors. Remove all fries from the filler doors.
Guide to identifying different F3D3 series models and their configurations.
Instructions for accessing and using factory-level setup parameters.
Guide to accessing and programming factory-level parameters.
Details the terms and conditions of the new equipment warranty.
Outlines the company's response times and service standards.
Provides a sequence of questions to diagnose common service problems.
Lists error messages, descriptions, and required actions for correction.
Detailed diagrams and part numbers for various unit components.
Wiring diagrams for different voltage configurations and control systems.
Quick guide to the functions of the control panel touch pads and display.
Procedures for accessing and modifying customer-level parameters.
Step-by-step guide for calibrating the load cell for accurate dispensing.
Basic safety guidelines and information for field service technicians.
Detailed instructions for replacing the load cell assembly.
Detailed steps for replacing the main control board.
Critical safety restrictions for servicing propane-based refrigeration systems.
Routine maintenance procedures for the refrigeration system.
Guide for checking refrigerant pressures and detecting leaks in the system.
Procedures for replacing the condensing unit.
To Next Page
General
