– 38 –
EN
Descaling tap sieve
Always use a citric acid-based descaling agent.
Other substances will damage the material!
Loosening and tightening can be made easier by
wrapping an elastic band around the sleeve of
the tap sieve. Take care that the sleeve of the tap
sieve is not damaged by the use of tools.
It is possible that the maximum quantity of water
has run through the filter within the year. In this
case, the tap will signal that the filter needs to
be changed. A new filter can be easily ordered at
www.franke.shop
Over the course of time, lime scale deposits will
appear on and alongside the tap sieve (aerator).
Unscrew the sleeve of the tap sieve (fig. 7D).
Clean the tap sieve using a suitable descaling
agent (fig. 7E).
Place the tap sieve into the sleeve (fig. 7F).
Place the gasket onto the tap sieve (fig. 7G) and
screw on the sleeve finger-tight (fig. 7H).
7E
7F
7D
7G
7H
M-Box
Check regularly whether water drips out of the
pressure relief valve. This dripping is a sign that
the inlet combination is (still) working correctly
(fig. 7I).
7I
To Next Page
Loading...
Need help?
General
