7 | Filling and emptying Franke Kaffeemaschinen AG
26 User manual Mytico Due
3. Fit the lid.
7.3 Setting the grind coarseness
WARNING
Risk of injury
If objects find their way into the bean hopper or grinder, splinters may be ejected, leading to injury.
a) Never insert any objects into the bean hopper or grinder.
Grinder adjustment wrench (560.0003.876)
Changing the grind coarseness affects the coffee quantity. The grinders must therefore be calibrated after
adjusting the grind coarseness.
If required, the grind coarseness can be set in stages for each grinder.
1. Lift the bean hopper lid.
2. Turn the unlocking handle approx. 90° clock-
wise as far as it will go.
ð The bean hopper is now unlocked.
3. Remove the bean hopper by lifting it up-
wards.
To Next Page
Loading...
Need help?
General
